PRODUCT

Qualities of these products satisfy dealers with not only their
demand stansards but also with convenient maintenances ans management abilities.

Metal Detectors

AFM-3000 A-Series(In-Foil Packaging)


Characteristics

1. Auto Calibration function
2. 10-inch 16.7M color TFT LCD (resolution:1024 x 600)
3. Multi-speed change operation is possible using the inverter.
4. Save and load 999item Product setting





5. For data analysis and Cumulative data:
    You can check the production status of each item on the Total
    screen. Enable access to aggregated data using Excel programs
6. Memory storage and update using USB: Can copy stored
   data of manufactured products to USB memory
7. Various communications (RS-232C, RS-422, Ethernet)
   and printing Option



Specifications

Ç¥°¡ ´Ù º¸ÀÌÁö ¾Ê´Â°æ¿ì´Â Ç¥¸¦ ÁÂ,¿ì·Î µå·¡±× ÇØÁÖ¼¼¿ä.
MODEL AFM-3000
A200 A250 A300 A350 A400
Belt width 200mm 250mm 300mm 350mm 400mm
Pass Height 50~150mm
Conveyor length 1000~1500mm
Speed range 20~60m/min
Rejector type Belt Stop,Flip Bar,Pusher,Air Blast, Drop Down
Power requirements 220VAC¡¾10%, Single phase,50/60Hz
Environmental conditions 5¢ªC~35¢ªC(41¢ªF~95¢ªF), Variation not to exceed ¡¾2¢ªC(4¢ªF)/hr, Relative humidity: 35%~85%
* Depending on the conditions of the product, you can select the appropriate screening method.

FM-2000T M-Series Tunnel Type(Small Products)


Specifications

If you can't see the table, drag the table left or right.
MODEL FM-2000T
M100 M150 M200 M250 M300 M350 M400
Belt Width 100mm 150mm 200mm 250mm 300mm 350mm 400mm
Aperture Width 200mm 250mm 300mm 350mm 400mm 450mm 500mm
Belt Material Urethane belt
Pass Height Aperture Height - 25mm = Pass Height
Conveyor Length 900~1300mm
Speed Range 10~70m/min
Rejector Type Belt stop, Flip bar, Pusher, Air blast, Drop down, Swing
Power requirements 220VAC¡¾10%, Single phase,50/60Hz
* Depending on the conditions of the product, an appropriate screening method can be selected..

FM-2000T LM-Series Tunnel Type (Large Products)


Specifications

If you can't see the table, drag the table left or right.
MODEL FM-2000T
LM300 LM350 LM400 LM450 LM500 LM550 LM600
Belt Width 300mm 350mm 400mm 450mm 500mm 550mm 600mm
Aperture Width 350mm 400mm 450mm 500mm 550mm 600mm 650mm
Belt Material Urethane belt, PVC belt, Modular(PE) belt
Pass Height Aperture Height - 30mm(or 35mm) = Pass Height
Conveyor Length 1300~1800mm
Speed Range 10~50m/min
Rejector Type Belt stop, Pusher, Swing
Power requirements 220VAC¡¾10%, Single phase,50/60Hz
* Depending on the conditions of the product, an appropriate screening method can be selected..

FM-2000T P-Series Pad Type(Pad Type)



Advantages of the Pad-typedt
(for example, milk - product with variety of heights and metallic Caps)



¡¤ The optimum sensitivity can be obtained under the condition of weak viscosity and liquid lines resulting from a variety of product heights,and by utilizing that
  metal components will settle 100% from the difference in density , this can be used for products that could not be solved using tunnel-types.
¡¤ This can be applied to products with metallic CAPPINGs, and in particular, exhibited an optimum sensitivity that cannot be attained with the tunnel-types for liquid
  type products during the test run conducted.
¡¤ In case when the conveyor width is set at 200mm, the total width is 300mm, utilizing the smallest space possible, allowing the product/ equipment to be places
  in a narrow space. Refer to



FMD-530F(Fall Type)


Metal detectors for bulk products in various industries, including food companies, chemical industries, etc.


¡¤Simple operation
¡¤Excellent detection performance by bulk inspection
¡¤Pre-package inspection
¡¤Not enough for aluminum wrappers and products that
  use deoxidizing materials





¡¤Diverter Options
¡¤Frame Options
¡¤Signal output when detecting metals (default)



Specifications

If you can't see the table, drag the table left or right.
Tunnel size 100 120 150 ...
Product pass-through
internal diameter
70 90 120 ...

FMD-530PL(Pipe Line Type)


liquid type metal detector for products

¡¤Minimize product losses and do not stop production by removing
  foreign substances using valves
¡¤Water cleaning is possible
¡¤Use Teflon as internal diameter pipe of metal detector





¡¤High temperature products can also be applied
¡¤Use 1.5, 2.0, and 2.5S pipe specifications (clamp connection)



Specifications

If you can't see the table, drag the table left or right.
Tunnel size 80 100 120 ...
The internal diameter
of a product
50 70 90 ...
The internal diameter
of a product
25 2.55 35 ...

FMD-530P(Pharmaceutical Type)


High-sensitivity metal detector required by pharmaceutical companies

¡¤Excellent detection performance
¡¤Maintaining freedom of installation by making small parts
¡¤Adjustable height and apply to various production lines
¡¤Easy to clean without special tools
¡¤Perfect response to GMP









¡¤Scope of angle control
¡¤Inlet size
¡¤Internal diameter
¡¤Entrance height 30'~40'
¡¤Exit height : 150mm*100mm changeable
                  300mm
                  800 mm (maximum +150 mm)
                  350 mm (maximum +150 mm)



TOP